Front Fan/Pcie And Card Guide Assembly - HP Z4 G4 Maintenance And Service Manual

Front fan/PCIe and card guide assembly

Follow these steps to remove the front fan/PCIe and card guide assembly:
1. Prepare the computer for disassembly (see
2. Remove the access panel (see
3. Disconnect the graphics power cables from the placeholder sockets (1) on the front fan/PCIe and card
guide assembly (if present).
4. Disconnect the front fan/PCIe and card guide assembly cable (2) from the system board.
5. Release the two retention clips (3) that secure the front fan/PCIe and card guide assembly to the
computer.
6. Tilt the front fan/PCIe and card guide assembly (4) away from the computer.
7. Lift the front fan/PCIe and card guide assembly (5) as far as the front fan/PCIe and card guide assembly
cable allows.
8. Remove the front fan/PCIe and card guide assembly.
Reverse this procedure to install the front fan/PCIe and card guide assembly.
Preparation for disassembly on page
Access panel on page 17).
15).
Front fan/PCIe and card guide assembly 21