HP ProDesk 400 G1 Maintenance And Service Manual page 130
Hide thumbs
Also See for ProDesk 400 G1:
- Specification (59 pages) ,
- Maintenance and service manual (126 pages)
Table of Contents
Advertisement
6.
From the outside, rear of the computer, remove the three Torx screws that secure the power supply
to the rear of the chassis.
7.
From the inside of the chassis, press the release button at the front of the power supply (1).
8.
Slide the power supply forward (2), and then lift it out of the chassis (3).
To install the power supply, reverse the removal procedure.
CAUTION:
clip under the drive cage.
120
Chapter 6 Removal and replacement procedures: Small Form Factor
When installing the power supply cables, make sure they are properly positioned in the
Hide quick links:
Advertisement
Table of Contents
