Accessory Installation; 1) Installation Of Motor Cover; 2) Installation Of Safety Plate; 3) Installation Of Thread Stand - SunStar SPS/E-BS1201 Series User Manual

4.6) Accessory Installation

4.6.1) Installation of Motor Cover

Attach the motor cover to the rear side of the machine by
using four fixing screws (4EA, small size).

4.6.2) Installation of Safety Plate

Attach the safety plate to the head.
Caution

4.6.3) Installation of Thread Stand

Assemble the thread stand and install it on the table.
Make adjustment to properly locate the thread stand.
18
To guarantee safety, make sure to install the safety plate before using the machine.
Face Plate
Safety Plate
Fixing Screw
Motor Cover