Needle; 1) Needle Installation; Thread; 1) Upper And Lower Thread Placement - SunStar SPS/E-BS1201 Series User Manual

5.2) Needle

5.2.1) Needle Installation

Loosen the needle fixing screw. With the long groove of
the needle headed forward, insert the needle until the
upper end of the needle touches the end of the hole, and
fix the needle by using the needle fixing screw.

5.3) Thread

5.3.1) Upper and Lower Thread Placement

1) Upper thread placement: Place the thread take-up
lever at the highest position, and pass the thread
through the main and sub thread adjusting devices.
2) Threading
Place the thread take-up lever at the highest position
before threading. For heavy materials, conduct
threading as in Fig.
materials and knit, conduct threading as in Fig.
3) Lower Thread Placement
Insert the bobbin into the bobbin case and insert the
thread into the thread groove. And then place the
needle under the spring of the tension adjusting plate.
Caution
20
, and for general and light
Insert the bobbin case in the way that the bobbin rotates clockwise when seen from behind.
.
Heavy Materials
25mm
Needle Fixing Screw
Needle
General Materials