How To Install The Table (Ba Type) - SunStar SPS/E-BS1201 Series User Manual

4.5) How to install the table (BA type)

1) Fix the oil container support
control box on the table (below).
2) Fix the power switch
3) Assemble the bed cushion rubber
4) Assemble the safety switch support rubber
table (below).
5) Fix the table (above) and (below) as in the figure.
(115mm high)
6) Assemble the hinge and the hinge rubber on the bed, and
insert the adjusting bolt into the hinge hole at
fasten it on the table (below) as in the figure.
16
, the oil dish , and the
on the table (above).
on the table (below).
on the
. Then
Table (above)
Table (below)
Fixing bolt
Hinge rubber
Hinge