Repair And Maintenance; Type Of Safety Labels - SunStar SPS/E-BS1201 Series User Manual

2.5) Repair and Maintenance

Danger

2.6) Type of Safety Labels

10
When machine repair is needed, it shall be conducted by SunStar A/S engineers only
who have finished the due training course.
1) For cleaning and repair, cut the main power supply. Wait for 4 minutes before starting
maintenance to make the machine completely discharged.
For main shaft motor and X,Y drive box, it takes 10 minutes before they
are completely discharged after the main power is cut.
Caution
2) Do not modify the machine specifications or parts without substantial consultations with
SunStar. Otherwise, it may threaten safety during machine operation.
3) Use the parts manufactured by SunStar to repair or replace the machine parts during A/S
service.
4) When repairing is completed, re-install all the removed safety covers.
Do not operate without finger guard and safety devices. Before
threading, changing bobbin and needle, and cleaning, turn off the
main switch.
Hazardous voltage will cause injury.
Be sure to wait at least 360 seconds before opening this cover after
turn off main switch and unplug a power cord.