Upc-E Number System Character Transmission; Upc-E Minimum Reads - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

UPC-E Number System Character Transmission

This feature enables/disables transmission of the UPC-E system number character.
UPC-E Number System Character = Transmit

UPC-E Minimum Reads

Specifies the minimum number of consecutive times a UPC-E label must be decoded before it is
accepted as a good read.
UPC-E Minimum Reads = 2
UPC-E Minimum Reads = 4
Product Reference Guide
UPC-E Number System Character Transmission
UPC-E Number System Character = Do not transmit
DEFAULT
UPC-E Minimum Reads = 1
DEFAULT
UPC-E Minimum Reads = 3
85