Code 11 Set Length 2 - Wasp WLS9600 Product Reference Manual

Code 11

Code 11 Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table
setting this feature.
Table 19. Code 11 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
186
Variable Length
19
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 11 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Code 11 Length
Mode, or the second fixed length if in
page 243
EXAMPLES
07 Characters 15 Characters
'0' and '7'
50 = Length 2 is 50 Characters
Control. Length 2 is the
Fixed Length
for detailed instructions on
50 Characters
'0' and 'F' '3' AND 2'
CANCEL
WLS9600