Label Id; Label Id: Pre-Loaded Sets; Label Id: Set Individually Per Symbology - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Label ID

A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-
0xFF), used to identify a barcode (symbology) type. It can be appended previous to or following
the transmitted barcode data depending upon how this option is enabled. This feature provides
options for configuring custom Label IDs as a pre-loaded set (see
below) or individually per symbology (see
If you wish to program the reader to always include an industry standard label identifier for ALL
symbology types, see the previous feature
See Label ID, starting on page 247

Label ID: Pre-loaded Sets

The reader supports two pre-loaded sets of Label IDs. See
page 247
CAUTION
DEFAULT
Label ID Pre-loaded Set = EU Set

Label ID: Set Individually Per Symbology

This feature configures a Label ID individually for a single symbology. See
Individually Per Symbology, starting on page 249
Product Reference Guide
of "References" for more information on setting this feature.
for details on the USA set and the EU set.
When changing from one Label ID set to another, all other reader configu-
ration settings, including the host interface type, will be erased and set to
the standard factory defaults. Any custom configuration or custom defaults
will be lost.
"Label ID: Pre-loaded Sets"
"Label ID: Set Individually Per Symbology" on page
"Global AIM ID" on page 53.
Label ID: Pre-loaded Sets, starting on
Label ID Pre-loaded Set = USA Set
for detailed instructions on setting this feature.
Label ID
55).
Label ID: Set
55