Standard 2 Of 5 Set Length 2 - Wasp WLS9600 Product Reference Manual

Standard 2 of 5

Standard 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for
the maximum label length if in
Length
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table
setting this feature.
Table 11. Standard 2 of 5 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
152
Mode. Length includes the barcode's check and data characters.
11
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Standard 2 of 5 Length
Variable Length Mode, or the second fixed length if in
page 243
EXAMPLES
07 Characters
'0' and '7'
50 = Length 2 is 50 Characters
Control. Length 2 is
for detailed instructions on
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL
Fixed
WLS9600