Codablock F Set Length 1 - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Codablock F Set Length 1

Specifies one of the barcode lengths for
label length if in
includes the barcode's data characters only. Characters can be set from 03 to 255 characters.
Table
setting this feature.
Table 6. CODABLOCK F Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Three Characters From
4
Appendix D, Keypad
5
Select Codablock F Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
Product Reference Guide
Variable Length
6
provides some examples for setting Length 1. See
03 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODABLOCK F LENGTH 1 SETTING
'0' , '0' and '3'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Codablock F Length
Mode, or the first fixed length if in
EXAMPLES
07 Characters
'0' , '0' and '7'
03 = Length 1 is 3 Characters
Codablock F Set Length 1
Control. Length 1 is the minimum
Fixed Length Mode. Length
page 242
for detailed instructions on
15 Characters 50 Characters
'0' , ' 1' and '5' '0' , ' 5' AND '0'
CANCEL
137