China Postal Code Set Length 2 - Wasp WLS9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

China Postal Code Set Length 2

This feature specifies one of the barcode lengths for
the maximum label length if in
Length
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table
setting this feature.
Table 15. China Postal Code Length 2 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3
4
Scan Two Characters From
5
Appendix D, Keypad
6
Select China Postal Code Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
Product Reference Guide
Mode. The length includes the barcode's check and data characters.
15
provides examples for setting Length 2. See
Ignore This
Length
00
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT China Postal Code LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
China Postal Code Length
Variable Length Mode, or the second fixed length if in
page 243
EXAMPLES
4 Characters
04
'0' and '4'
50 = Length 2 is 50 Characters
China Postal Code Set Length 2
Control. Length 2 is
for detailed instructions on
14 Characters 50 Characters
14
'1' and '4' '5' AND '0'
CANCEL
Fixed
50
165