Intercomp CW250 User Manual page 15

if the scale is in the Accumulation Print mode. (TOTAL icon flashing). After
accumulation, remove the first group of items from the scale(s).
3. With the next group of items stable on the scale(s), press the
PRINT/ACCUMULATE button. This will add the total weight to the accumulated
total. If you are using a printer, a print ticket with all weights will now be printed.
4. Repeat step 3 as needed. If the accumulated total becomes too large to display,
the "diSP" message and error icon will be displayed.
5. When finished, you may clear the accumulated total weight by pressing and holding
the ZERO button until the display show "CLr.t". The display will clear the
accumulated total and the number of accumulations.
Note: The scale will not accumulate when the weight is negative, zero, or if the
weight is in motion. A display message "Ac.Err" with error icon will be displayed
if any of those conditions are present. After a successful accumulation the scale
must return to zero before you accumulate the next weight. If you attempt to
accumulate the next weight before allowing the scale to return to zero, a display
message "Ac.Err" with error icon will be displayed.
Page 15 of 29
CW250, Users
Rev J, October, 2010