Data Format; Accumulating Print - Intercomp CW250 User Manual

Data Format

When the serial output is set to either on-demand or continuous mode, the
transmitted data is in the format shown below:
AAAAAAA BB<cr><lf>
Item
AAAAAAA
BB
<cr>
<lf>
The AAAAAAA field will vary in length depending on the length of the
number and could contain a decimal point and/or a minus sign. The
weight will either be local weight or total weight, depending on which mode
you're in.

Accumulating Print

See section titled "Using Accumulated Total" for both the Axle and the standard
formats.
Meaning
weight
units "lb" or "kg"
carriage return
linefeed
Page 11 of 29
Rev J, October, 2010
ASCII Hex ASCII Decimal
0D
0A
CW250, Users
13
10