Table of Contents
Advertisement
Updating the machine Firmware
The machine's current firmware and detailed step-by-step instructions for the update process can be
downloaded from www.bernina.com. In general, personal data and settings are automatically transferred
during a firmware update. For reasons of safety, it is also recommended to save data and settings on a
BERNINA USB stick (optional accessory) before the firmware update is started. If personal data and settings
should get lost during a firmware update, they can be transferred to the machine again afterwards.
The BERNINA USB stick (optional accessory) has been removed too early
NOTICE
Firmware has not been updated and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the update has been completed
successfully.
> Insert the BERNINA USB stick (optional accessory), FAT32 formatted, providing the latest software into
the port.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Save data on USB stick».
– The icon is checkmarked in green.
> To start the firmware update, touch the icon «Update».
Update
Update
Recovering saved data
If personal data and settings after a software update are not available anymore, they can be transferred to
the machine again afterwards.
The BERNINA USB stick (optional accessory) has been removed too early
NOTICE
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
successfully.
> Insert the BERNINA USB stick (optional accessory) providing the saved data and settings into the USB port
of the machine.
> Touch the icon «Home».
Setup Program
65
Advertisement
Table of Contents
