Use Of The Power Cable (Only In Usa/Canada); Foot Control (Only Usa/Canada); Software; Firmware Operation - Bernina Q 16 User Manual

My BERNINA
NOTICE! Accessories mentioned in this manual but not listed in the list of supplied accessories
count as optional accessories that you can acquire from your specialist BERNINA dealer.

Use of the power cable (only in USA/Canada)

The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!

Foot control (only USA/Canada)

Always use the type LV1 foot control with the BERNINA Q 16.

1.5 Software

Firmware operation

The touch-sensitive screen can be operated with the finger or stylus.
Tap: Short tap of an element.
Draw: Tap the screen and slowly move in one direction, eg. for scrolling up and down.
Navigation
18
Illustration Name
Bobbin thread tension gauge
Power cable
Foot control
«Home»
Navigation path
«Close»
Purpose
For measuring and adjusting the
bobbin thread tension.
To connect the machine with the
power supply system.
To start and stop the machine.
To control the sewing speed in
manual mode.
Switch between «Home screen»
and «Sewing screen».
Activate the help function.
Show a previous menu level.
Close the window.