Use Of The Power Cable (Only Usa/Canada); Overview Presser Feet - Bernina 570 QE User Manual

Illustration

Use of the power cable (only USA/Canada)

The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!

Overview presser feet

Supplied standard presser feet
Illustration Number
#1C
Name
Seam ripper
Height compensating tool
Selection of needles
Screwdriver red (slot)
Brush
Sewing machine oil
Power cable
Foot control
Name Purpose
Reverse pattern foot To sew various
practical and
decorative stitches.
To sew forward and in
reverse.
My BERNINA
Purpose
To undo seams and to cut
buttonholes open.
To level an angled position of
the presser foot sole when
sliding over thick seams.
For any common applications.
To loosen and tighten slotted
screws.
To clean the feed dog and the
looper area.
To oil the machine.
To connect the machine with the
power supply system.
To start and stop the machine.
To control the sewing speed.
Example
21