Use Of The Power Cable (Only Usa/Canada); Overview Presser Feet - Bernina 435 Instruction Manual

Illustration

Use of the power cable (only USA/Canada)

The machine has a polarized plug (one blade wider than the other). To reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the
plug in any way!

Overview presser feet

NOTICE! Depending on the country where the deliveries are sent to, the contents either include
snap-on presser feet or standard presser feet. The respective standard accessory is shown in the
two following charts. When snap-on presser feet are delivered as standard accessory, a claim to
get standard presser feet for free can't be made. The standard presser feet can be ordered as
optional accessory.
Name
Height compensation tool
Selection of needles
Screwdriver red
Brush
Lubricator
Power cable
Foot control
My BERNINA
Purpose
The height compensation tool
levels an angled position of the
presser foot sole when sliding
over thick seams.
The needle assortment contains
different versions and sizes of
needles for all the common
applications.
The red screwdriver is supplied
as an all-round tool.
The brush is used to clean the
feed dog and the hook area.
The lubricator is used to fill up
the oil depots.
The power cable connects the
machine with the power supply
system.
Via the foot control the machine
is started and stopped. The
speed of the machine is also
controlled via the foot control.
Always use the foot control of
the type LV1 with this machine.
21