NEC Electra Elite IPK General Description Manual page 92

Document Revision 4
___________________________________________________________________________________
P-10
Q-1
R-1
R-2
R-3
R-4
R-5
___________________________________________________________________________________
2 - 38
P U S H B U T T O N D I A L - D T M F O R D P
Pushbutton Dial – DTMF or DP is provided on all Single Line Telephones
and outside lines. Tie Lines are assigned per trunk to generate either Dual-
Tone Multifrequency (DTMF) or Dial Pulse (DP) dialing signals.
QUICK TRANSFER TO VOICE MAIL
A station user transferring a call can force the call to be transferred to the
called party voice mail box after the transferred call recalls, after an internal
station number is dialed while performing a screened transfer, or during
intercom calls.
When 5-, 6-, or 7-digit station numbers are used, this feature is unavailable.
R E C A L L K E Y
The Recall Key either generates a hookflash to access features provided by
the outside exchange or abandons a call while retaining the CO/PBX line for
another call. Each Multiline Terminal has a Recall key. The function of this
key is programmed.
R E C A L L W I T H S T A T I O N I D E N T I F I C A T I O N
A transferred, held, or camped-on call that is not answered in a specified
time, recalls. During the recall, the Multiline Terminal display shows the
station number that is recalling and the station that did not answer.
R E D I A L K E Y
Users can press the Redial key and dial the Speed Dial buffer number to
access System and Station Speed Dial. Users can also press the Redial key
and to redial the last outside number dialed.
R E M O T E P R O G R A M M I N G
Remote Programming is used to modify and save all system parameters
from a remote location using a modem. This is a variation of System
Administration Terminal (SAT) PC Programming, and additional software
other than PC Programming is not required.
R E S I D E N T S Y S T E M P R O G R A M
When power is supplied to the system, the hardware configuration is
scanned and Resident System Program default values are assigned. This
enables immediate operation, even before the system is programmed to
accommodate the individual site requirements.
Electra Elite IPK
Features