NEC Electra Elite IPK General Description Manual page 13

Electra Elite IPK
___________________________________________________________________________________
SERVICE
REQUIREMENTS
UL REGULATORY
INFORMATION
INDUSTRY CANADA
REQUIREMENTS
___________________________________________________________________________________ ___________________________________________________________________________________
General Description Manual General Description Manual - v
If equipment malfunctions, all repairs must be performed by an authorized
agent of NEC Unified Solutions, Inc. or by NEC Unified Solutions, Inc. The
user requiring service is responsible for reporting the need for service to
an NEC Unified Solutions, Inc. authorized agent or to NEC Unified
Solutions, Inc.
This equipment has been listed by Underwriters Laboratories and found to
comply with all applicable requirements of the standard for telephone
equipment UL 1459.
Industry Canada has established rules that permit this telephone system
to be directly connected to the telephone network. Prior to the connection
or disconnection of this telephone system to or from the telephone
network, the telephone company must be provided with the following
information.
1. Your telephone number.
2. IC registration number: 140 7942 A
3. Ringer Equivalence Number (REN) of the equipment: 2.1
The Industry Canada label identifies certified equipment. This certification
means that the equipment meets certain telecommunications network
protective, operational and safety requirements as prescribed in the
applicable Terminal Equipment Technical Requirements document(s). The
Department does not guarantee that equipment operates to the user
satisfaction.
Before installing this equipment, users should ensure that it is permissible
to be connected to the facilities of the local telecommunications company.
The equipment must also be installed using an acceptable method of
connection. The customer should be aware that compliance with the
above conditions may not prevent degradation of service in some
situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to
this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the
equipment.
Document Revision 4
v