NEC Electra Elite IPK General Description Manual page 89

Electra Elite IPK
___________________________________________________________________________________
M-7
N-1
N-2
N-3
N-4
N-5
___________________________________________________________________________________
General Description Manual
M U S I C O N H O L D
A locally provided external music source or an internal music source can be
used to supply music to parties on hold, to assure them that they are still
connected to the system. System Software allows CO ports to provide
multiple music sources to different COs in the system.
N E C E l i t e P C A s s i s t a n t
This new feature allows basic telephone functionality through a software
interface from a desktop application. The CT(U)-R/CT(A)-R Adapter is the
TAPI device for the application to control the user telephone. Using this
application, the user can easily manage call handling tasks without switching
attention between the telephone and the PC.
For Call Park to work, Memory Block 1-8-51 (Call Park Selection) must be
set to LK1 to support 10 park locations (R4000 or higher).
N e s t i n g D I A L
Multiline Terminal users may store up to four System or Station Speed Dial
numbers in one Station Speed Dial buffer. The user can press the Redial key
and dial a single Station Speed Dial buffer number to consecutively dial all
four buffers.
System software permits input stored characters to be entered on the dial
pad, but does not allow the character code table to be used.
N I G H T C A L L P I C K U P
Night Call Pickup functions when the system is in Night Mode and an
incoming call rings. When the Night Chime is ringing, a station user can dial
the Night Call Pickup Access Code or press a Feature Access key
programmed for Night Call Pickup to answer incoming calls.
N I G H T C H I M E
Night Chime provides a common audible tone with one relay contact for
control when incoming CO/PBX calls are received in Night Mode. The relay
contact closures may also be used for external bells or chimes. The Night
Chime feature is used after working hours to alert night personnel for
incoming outside calls.
N I G H T T R A N S F E R
Attendant Positions (with or without Attendant Add-On Consoles) can place
the system in or out of Night Mode. This changes the ring assignment of
CO/PBX lines, activates Assigned Night Answer (ANA) Assignments, Night
Call Pickup, Night Chime, Code Restriction Class Assignments, and
Automated Attendant messages. This feature can operate system-wide or
per tenant.
Document Revision 4
2 - 35