NEC Electra Elite IPK General Description Manual page 120

Electra Elite IPK
___________________________________________________________________________________
Table 3-3 Maximum System Capacities for Application Interface ETUs (Continued)
Application
Interface ETUs
IVR Application
(VMP(4)/(8)-U( )
ETU with IVR HDD
Kit)
MIFA-U( ) ETU
MIFM-U10 ETU
MIFM-U20 ETU
PBR( )-U( ) ETU
___________________________________________________________________________________
General Description Manual
Description
This ETU is an Interactive Voice
Response system with 4 ports to support
IVR applications.
When the DSP-U( ) module is attached,
8 ports are available.
It can be installed in any interface slots.
This ETU shares the total number of
station ports in the system.
Multiple Interface Unit for UCD/ACD
This ETU provides additional memory for
processing ACD/UCD.
When ACD feature is desired, the
KMA(1.0)U must be installed.
Multiple Interface Unit for Multifunction
This ETU provides additional memory
for PC programming, SMDR, LCR, Caller
ID scrolling, and Wireless programming.
When the LCR or Caller ID Scroll
functions are desired, the KMM(1.0)U
must be installed.
Multiple Interface Unit for Multifunction
This ETU provides additional memory
and processing power for PC
programming, Wireless activation,
SMDR, LCR, ANI/Caller ID scrolling.
PC programming, Wireless activation,
and SMDR are standard.
When the LCR or Caller ID Scroll
functions are desired, the KMM-U20
upgrade chip must be installed.
4-Channel - Push Button Receiver Unit
The Push Button Receiver ETU detects
and translates DTMF tones generated by
Single Line Telephones, modems, or
facsimile machines. The PBR provides
four circuits for Single Line Telephones
only.
Four PBR circuits are built in the

CPUI( )-U( ) ETU.
Maximum Capacities
Basic Port Expanded
Package Port Package
1 1
1 1
1 1
1 1
1 1
Document Revision 4
Notes
Note 5
Note 1, 3
Note 1, 2
Note 1, 2, 5
3 - 17