Toshiba RAV-104SBH-PE Service Manual page 85

6.2.2 Malfunction Check Display
The following fault code display occurs when the CHECK button is pressed for 1 second.
Fault codes can be identified from the remote controller or Outdoor Unit. (LED status)
G
Up to 16 Indoor Units can be connected to one remote controller using group control.
G
A maximum of 2 fault codes for each of the 16 Indoor Units can be displayed at 2 second
G
intervals.
(a) RESET key. Use a pointed
object to operate the RESET key.
This will reset the remote controller
(to the initial setting). All faults
codes erased.
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
6. THE REMOTE CONTROLLERS
(a)
85
www.heronhill.co.uk
Unit number
Check code
Fax: 01823 665807