Depending on the configuration option setting,
you may or may not be required to enter your
operator ID.
If your operator ID is required, a configuration
option may be set to remember your ID for up
to 1 hour after the bedside unit is turned off. If
your ID appears at the operator screen, press Ok
to confirm it is correct. If the ID is not correct,
simply enter your ID and it will replace the
existing ID.
Start by selecting Lin 1.
4
Select the Linearity Solution
5
lot number from the list
displayed.
Alternatively, scan the
barcode on the linearity
solution vial.
Select Lot #
Linearity 1
LIN4001
LIN4002
Enter Lin 1
Lot #
Menu Scan
63