Lifescan SureStep Pro Operator's Manual page 44

Patient Test
Depending on the configuration option setting,
you may or may not be required to enter the
patient's ID.
Select the test strip lot
6
number (and code) from the
list displayed. The last test
strip lot number selected
appears at the top of the list.
Use the arrows to scroll
through the list, if necessary.
Alternatively, scan the
barcode on the test strip
bottle label.
A configuration option may have been selected
which would allow you to enter a new test strip
lot number at the bedside unit. If you do not see
the lot number in the list and the Enter Strip Lot
button appears on the screen, press the button
and manually enter the test strip lot number and
CTL code.
CAUTION
To obtain accurate results, you must enter the
correct test strip lot number (and code) for each
new test.
32