Using The Connection Module - Lifescan SureStep Pro Operator's Manual

Data Management
A series of messages are
displayed on the bedside
unit screen indicating the
status of the transfer. When
Data Transfer
the transfer is complete, the
Data Transfer
bedside unit beeps and a
Complete
message appears.
Cont.

Using the Connection Module

The connection module, used with a modem,
provides a remote communication link
between the bedside units and the workstation.
By placing the bedside unit in the connection
module and dialing the workstation modem,
data is transferred through a standard analog
phone line.
NOTE
If a fax machine is sharing the same analog line
as the connection module modem, do not
transfer data while a fax is being sent or received.
NOTE
SureStepPro 2.0 users – If you are transferring
data over an Ethernet network, MeterLink
software must be running on the workstation.
44