Lifescan SureStep Pro Operator's Manual page 48

Patient Test
Check the white pad on the front of the test
8
strip and the confirmation dot on the back of
the test strip.
• If the white pad becomes completely
saturated, you have applied too much blood
for an accurate result. Repeat the application
with a new test strip.
• The confirmation dot on the back of the test
strip should be completely blue.
BACK
If white patches or streaks are visible on the
blue confirmation dot, you may not have
applied enough blood for an accurate result.
Repeat the application with a new test strip.
36
FRONT
confirmation
dot
BACK
FRONT