Code 39 Two Discrete Lengths (Parameter L2); Code 39 Length Within Range; Code 39 Any Length - Honeywell 8650 User Manual

Code 39 Two Discrete Lengths (Parameter L2)

This option decodes only those codes containing two selected lengths. For example, when you want to scan only
Code 39 symbols containing 2 or 14 characters, scan the "Code 39 Two Discrete Lengths" bar code and then "0",
"2", "1" and "4" bar codes using the Keypad Number Symbols (page 4-72) at the end of this chapter.
To begin setting two discrete lengths, scan this bar code:
Next, scan four numeric bar codes that correspond to the desired value. Single digit numbers must have a leading
zero. If you wish to change your number selection, scan Cancel on the Keypad Number Symbols page.

Code 39 Length Within Range

This option decodes a code type within a specified minimum and maximum range. For example, when you want
to scan only Code 39 symbols containing between 4 and 12 characters, scan the "Code 39 Length Within Range"
bar code and then "0", "4", "1" and "2" bar codes using the Keypad Number Symbols (page 4-72).
To begin setting lengths within a range, scan this bar code:
Next, scan numeric bar codes that correspond to the desired value. Single digit numbers must have a leading
zero. If you wish to change your number selection, scan Cancel on the Keypad Number Symbols page.

Code 39 Any Length

This option decodes Code 39 bar codes containing any number of characters.
To set any length, scan this bar code:
4 - 38