Return To Factory Default Settings - Honeywell 8650 User Manual

Return to Factory Default Settings

Choose one of the following methods to restore factory defaults in the module:
1. Scan the Restore Factory Defaults (page 3-2) bar code.
2. To physically reset the module to factory default settings, remove the battery. Replace the battery while pressing the
ring scanner trigger for 30 or more seconds and the factory default configuration is restored.
Important:
After resetting the module to factory default settings, the next step is to open the bar code wedge panel on the host mobile
device collecting the scanned data. Click the OK button to close the panel. This action will synchronize all scanner for-
mats.
2 - 17