Beep On Reconnect - Honeywell 8650 User Manual

Set Suspend Timeout to 30 minutes
Set Suspend Timeout to 45 minutes
Set Suspend Timeout to 60 minutes

Beep on Reconnect

When Beep on Reconnect is enabled and reconnect is successful, the module emits a pattern of a short low beep and a
short high beep and the Blue LED blinks slowly, every 4 seconds.
When Beep on Reconnect is disabled and reconnect is unsuccessful over the reconnect interval, the module emits a pat-
tern of a short high beep and a short low beep and the blue LED blinks fast, every 1 second.
Scan the Disable Beep on Reconnect to disable audible notification for connect and disconnect.
* Enable Beep on Reconnect
Disable Beep on Reconnect
3 - 5