Suffix 2; Scan Data Transmission Format - Honeywell 8650 User Manual

Next, scan four numeric bar codes that correspond to the computer keycode using the
4-72).
If you wish to change your selection, scan Cancel on the Keypad Number Symbols page.

Suffix 2

To begin setting Suffix 2 value, scan this bar code:
Next, scan four numeric bar codes that correspond to the computer keycode using the
4-72).
If you wish to change your numeric selection, scan Cancel on the Keypad Number Symbols page.

Scan Data Transmission Format

Note: Parameter Prefix and Suffix
Use this option when you want to append a prefix and suffix to the decode data.
Set this parameter by scanning one of the following bar codes.
* Data As Is
[Data] [Suffix 1]
[Data] [Suffix 2]
(page 4-8) should be set after setting this parameter.
Keypad Number Symbols (page
Keypad Number Symbols (page
4 - 9