Power Mode
Note: Mobile devices are designed to be operated in Low Power Mode. For best results this value should remain
unchanged.
Note: A parameter setting of Continuous On means the laser scanner will not power down until the mobile device is
powered off.
A parameter setting of Low Power means the laser scanner will enter low power mode after one second of waiting for a
Scan button press. Pressing the Scan button will begin the decode sequence.
Select a Power Mode by scanning either of the bar codes shown below.
Continuous On
* Low Power
Scan Angle (SE955 only)
Choose one of the options below to set the scan angle to narrow or wide. Once the parameter bar code is scanned, the
Scan Angle setting is persistently stored.
Select an option by scanning one of the bar codes shown below.
Narrow Angle (35°)
* Wide Angle
See Also:
Scan Angle (SE955 only) superseded
(page 4-69)
4 - 17