Trioptic Code 39; Convert Code 39 To Code 32 - Honeywell 8650 User Manual

Trioptic Code 39

Trioptic Code 39 symbols always contain six characters.
When Trioptic Code 39 is enabled, set the Code 39 Full ASCII parameter to disabled. Both parameters should not be
enabled simultaneously.
Set this parameter by scanning either of the bar codes shown below.
Enable Trioptic Code 39
* Disable Trioptic Code 39

Convert Code 39 to Code 32

Note: Code 39 must be enabled in order for this parameter to function.
Note: When parameter Code 32 Prefix is to be enabled, this Convert Code 39 to Code 32 (Italian Pharmacy Code)
parameter must also be enabled.
Note: Set this parameter by scanning either of the bar codes shown below.
Enable Convert Code 39 to Code 32
* Disable Convert Code 39 to Code 32
5 - 40