Transmit Code 39 Check Digit; Code 39 Full Ascii Conversion - Honeywell 8650 User Manual

Transmit Code 39 Check Digit

When enabled, the check digit is transmitted with the data.
Code 39 Check Digit Verification must be enabled for this parameter to function.
Set this parameter by scanning either of the bar codes shown below.
Enable Transmit Code 39 Check Digit
* Disable Transmit Code 39 Check Digit

Code 39 Full ASCII Conversion

Note: Code 39 Full ASCII and Trioptic Code 39 should not be enabled simultaneously.
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set.
Set this parameter by scanning either of the bar codes shown below.
Enable Code 39 Full ASCII Conversion
* Disable Code 39 Full ASCII Conversion
When enabled, the ASCII character set assigns a code to letters, punctuation marks, numerals, and most control key-
strokes on the keyboard.
The first 32 codes are non-printable and are assigned to keyboard control characters such as [Backspace] and [Return or
Enter]. The other 96 are called printable codes because all but [Space] and [Delete] produce visible characters.
Code 39 Full ASCII interprets the bar code special character ($ + % /) preceding a Code 39 character and assigns an
ASCII character value to the pair.
See the table titled ASCII Character Equivalents
5 - 44
(page 9-2).