Lengths For Code 128; Isbt-128 - Honeywell 8650 User Manual

The following table indicates the behavior of the SE955 in each of the four possible parameter settings.
Standard Code 128
Disable
Disable
Enable
Enable

ISBT-128

Set this parameter by scanning either of the bar codes shown below.
* Enable ISBT-128
Disable ISBT-128

Lengths for Code 128

No length setting is required for Code 128. The default setting is Any Length.
4 - 34
UCC/EAN 128
Disable
Enable
Disable
Enable
Effect and Example
No Code 128 symbols can be read.
Read only symbols with leading FNC1.
Examples:
FNC1 FNC1
ABCD E are read as ABCD
FNC1 FNC1
A BCD E are read as ABCD
FNC1FNC1 FNC1
ABCD E are read as ABCD
FNC1
ABCD E cannot be read
ABCDE cannot be read
Read only symbols without leading FNC1.
Examples:
FNC1 FNC1
ABCD E cannot be read
FNC1 FNC1
A BCD E cannot be read
FNC1FNC1 FNC1
ABCD E cannot be read
FNC1
ABCD E is read as ABCD
ABCDE is read as ABCDE
Read both types of symbols.
Examples:
FNC1 FNC1
ABCD E are read as ABCD
FNC1 FNC1
A BCD E are read as ABCD
FNC1FNC1 FNC1
ABCD E are read as ABCD
FNC1
ABCD E is read as ABCD
ABCDE is read as ABCDE
29
E
29
E
29
E
29
E
29
E
29
E
29
E
29
E