Transmit Code 39 Check Digit; Trioptic Code 39 - Honeywell 8650 User Manual

Transmit Code 39 Check Digit

When enabled, the check digit is transmitted with the data.
Parameter setting for "Code 39 Check Digit Verification" has no effect on this parameter value.
Set this parameter by scanning either of the bar codes shown below.
Enable Transmit Code 39 Check Digit
* Disable Transmit

Trioptic Code 39

Trioptic Code 39 symbols always contain six characters.
When Trioptic Code 39 is enabled, set the "Code 39 Full ASCII" parameter to disabled. Both parameters should not be
enabled simultaneously.
Set this parameter by scanning either of the bar codes shown below.
Enable Trioptic Code 39
* Disable Trioptic Code 39
4 - 39