Codabar; Clsi Editing - Honeywell 8650 User Manual

Codabar

When enabled, Codabar symbols will be scanned, decoded and transmitted.
Set this parameter by scanning either of the bar codes shown below.
Enable Codabar
* Disable Codabar

CLSI Editing

When enabled, the start and stop characters are stripped from the bar code and a space is inserted after the 1
th
10 characters of a 14 character Codabar symbol.
Set this parameter by scanning either of the bar codes shown below.
Note: Symbol length does not include start and stop characters.
Enable CLSI Editing
* Disable CLSI Editing
5 - 56
st th
, 5 , and