Chapter 9 - Technical Specifications; Bluetooth Ring Scanner Module; Technical Specifications; Environmental Specifications - Honeywell 8650 User Manual

9

Technical Specifications

Bluetooth Ring Scanner Module

Technical Specifications
I/O Port
Module Size
Module Weight
Battery

Environmental Specifications

Operating Temperature
Storage Temperature
Water and Dust
Resistance
Humidity
Corrosion
Chemical Resistance
Abrasion Resistance

Bluetooth Radio

The CF Bluetooth Radio in the Bluetooth Ring Scanner is Bluetooth Special Interest Group (SIG) Qualified, is listed as an
EPL (End Product Listing) and with QDID: B011904.

Bluetooth Ring Scanner Battery Charger

Battery: Li-ion 3.7v 750mAh battery with a 500 charge/discharge life cycle

Electrical

Battery packs may leak up to 1mA current through the battery contacts when left in an unpowered battery charger charging
pocket.
Parameter
Power Supply Input Voltage (V AC-IN)
Power Supply Input Frequency (freq)
A 22 spring-pin, symmetrical port
Without Scanner : Height 0.75" / 1.90cm x Width 1.75" / 4.44cm x Length 2.4" / 6.1cm
With Scanner : Height 0.75" / 1.90cm x Width 1.75" / 4.44cm x Length 2.9" / 7.4cm
2.15oz / 60.9g with battery / 1.60oz / 45g without battery
4.05 – 4.15oz / 114g – 117g with battery and scanner
Ring Scanner : 1.75oz / 49.6g
Ring Imager : 1.85oz / 52.4g
Li-Ion, 3.7v 750mAh with a 500 charge/discharge life cycle
-4° F to 122° F (-20° C to +50° C)
-40° F to 158° F (-40°C to +60°C)
Sealed to IP-54 specifications or better
5% to 95% relative humidity, non-condensing
Corrosion resistant when exposed to water and common cleaning chemicals
Corrosion resistant when exposed to water and common cleaning chemicals
Housing resists normal abrasion from dirty hands.
Minimum Maximum
100 VAC 240VAC
47Hz 63Hz
Note
Auto-switching
9 - 1