Step 4: Mixing; Muting The Input Signal/Rhythm Sound; Adjusting Level/Panning/Eq - Zoom Palmtop Studio PS-04 Operation Manual

Quick Guide

Step 4: Mixing

When recording of tracks 1 – 4 is finished, create the final stereo mix by adjusting the level, EQ
(equalizer), panning (stereo left/right position), send/return effect intensity and other track parameters.
4-1

Muting the input signal/rhythm sound

Mute the input signal and guide rhythm so that no unwanted content will be included in the final
recording.
1.
To mute the guide rhythm, press the [RHYTHM] key to switch to RHYTHM
mode and then slide faders 1 and 2 fully down.
When the setting is made, press the [EXIT] key to return to the AUDIO mode top screen.
H
INT
If desired, you can add drum and bass sounds to the mix. In this case, track parameters
(level, EQ, panning/balance, send/return effect intensity) can also be set for drum/bass.
2.
To mute the input, press the [TRACK PARAMETER] key from the AUDIO mode
top screen to bring up the input source display.
3.
Slide the fader for the currently selected input source fully down, and then
press the [EXIT] key.
The AUDIO mode top screen returns.
H
INT
The input signal can also be sent directly to the stereo mix.
4-2

Adjusting level/panning/EQ

Adjust level/panning/EQ for each track by setting the track parameters of the integrated mixer.
1.
To set the level balance of the tracks, adjust faders 1 – 4 from the AUDIO mode
top screen.
2.
To adjust panning and EQ for each track, press the [TRACK PARAMETER] key
and then use the cursor left/right keys or the status keys to select the track.
When track parameters are shown, the cursor left/right keys or the status keys can be used to select
the track.
The level meter for the currently selected track flashes.
26 ZOOM PS-04