Overheat Cut-Off Device - Baxi Solo 2 60 RS Installation And Servicing Instructions

Overheat Cut-Off Device - Page 29
Operation
The overheat cut-off device is of the manual reset type and
therefore it is important that the user knows how to reset the
control should it ever cut out.
Remove the lower door panel by following the sequence of
diagrams.
Reach into the outer case and locate the reset button
adjacent to the control box. Press the button to reset the
overheat thermostat.
The boiler must be reignited manually.
NOTE: Any interruption to the electricity supply may cause
the device to operate.
29