Overheat Cut-Off Device - Baxi Solo 2 60 RS Installation And Servicing Instructions

OVERHEAT CUT-OFF DEVICE

1
3
The overheat cut-off device is of the manual reset
type and therefore it is important that the user
2
knows how to reset the control should it ever
cut out.
Remove the lower door panel by following
the sequence of diagrams.
Reach into the outer case and locate
The boiler must be reignited manually.
NOTE: Any interruption to the electricity supply may
cause the device to operate.
Operation
the reset button adjacent to the
control box. Press the button to
reset the overheat
thermostat.
29