Replacing The System Fans; Figure 18 Installing Thes; Fans - Cybernet ZPC-GX31 User Manual

Table of Contents

3.6 Replacing the System Fans

There are two system fan connectors (FAN1, FAN2) on the ZPC-GX31 Motherboard

which supports two 12V DC fans.

You may replace the system fans as follows:

Remove the CPU & Heatsink as shown in section 3.3.2.

Disconnect the system fan power connectors at FAN1 and FAN2 locations on

the Motherboard.

Remove the 8 Phillips fan screws and slide the system fans up and out of the

system case.

Insert the new system fans, replace the 8 Phillips screws and connect the

system fan wires to the FAN1 and FAN2 headers on the Motherboard.

Replace the CPU & Heatsink as shown in section 3.3.1.

NOTE: The unit ships with the fans installed and already connected.

H a r d w a r e I n s t a l l a t i o n a n d R e p l a c e m e n t

Figure 18 Installing the System Fans

ZPC-GX31 User Guide

Table of Contents