Table of Contents
Advertisement
ZPC-GX31 User Guide
4.4 CMOS Setup Utility Main Menu
Power on the computer and press <DEL> immediately to run the CMOS Setup Utility.
The setup main menu will appear on the screen.
SYSTEM OVERVIEW: This page includes System BIOS Information, Processor,
System memory and displays the System Time and System Date.
ADVANCED SETTINGS: This setup page includes sub-menus for CPU
Configuration, IDE Configuration, Hardware Health Configuration, ACPI Configuration
and USB Configuration.
BOOT SETTINGS: This page includes Full Screen Logo Display, Bootup Num-Lock
Wait for 'F1' If Error, Hit 'Del' Message Display as well as sub-menus for Boot Device
Priority, Hard Disk Drives, CD/DVD Drives.
SECURITY SETTINGS: This page includes Change Supervisor Password and
Change User Password.
ADVANCED CHIPSET SETTINGS: This page includes sub-menus for North Bridge
Configuration and South Bridge Configuration.
EXIT OPTIONS: This page includes Save Changes and Exit, Discard Changes and
Exit, Discard Changes, Load Optimal Defaults and Load Failsafe Defaults.
4.5 Load Fail-Safe Defaults Option
The FAIL-SAFE DEFAULT values are the most appropriate for the greatest stability
according to the system parameters. The command to Load Failsafe Defaults is
found in the EXIT OPTIONS page.
4.6 Load Optimized Defaults Option
The ZPC-GX31 is shipped with the Optimized Defaults loaded. The optimized
defaults place demands on the system that may be greater than the performance level
of the components, such as the CPU and the memory. You can cause fatal errors or
instability if you install the optimized defaults when your hardware does not support
them. The command to Load Optimized Defaults is found in the EXIT OPTIONS
page.
26
C M O S S e t u p U t i l i t y
Advertisement
Table of Contents
