Table of Contents
Advertisement
ZPC-GX31 User Guide
3.3 CPU and CPU Heatsink Installation
3.3.1
CPU Installation Procedure
1.
On the motherboard, identify the Intel LGA-775 CPU Socket.
2.
Push the CPU socket lever slightly to the side and then raise it as far as it can
go. Lift CPU metal cover.
3.
Identify the package orientation corner notches for the LGA-775 socket.
Insert CPU into socket, and lower CPU metal cover as shown in the picture
above. The processor should drop into place without any force. If it doesn't
seat properly, check that you have the CPU orientation in the correct position.
4.
Swing the locking lever down to lock the processor in place and latch the lever
under the catch on the side of the socket.
5.
The Heatsink only fits one way over the CPU. Center the Heatsink over the
CPU aligning the four screws. Screw in the Heatsink diagonally being
careful not to use force.
14
Figure 11 CPU Installation
H a r d w a r e I n s t a l l a t i o n a n d R e p l a c e m e n t
Advertisement
Table of Contents
