Installing Peripheral Devices; Installing A Sata Hard Disk Drive; Frame - Cybernet ZPC-GX31 User Manual

ZPC-GX31 User Guide

3.4 Installing Peripheral Devices

3.4.1

Installing a SATA Hard Disk Drive

A SATA drive cable supports the Serial ATA format hard disk drive. This hard drive
can be any capacity as long as it matches the 3.5" form factor of the ZPC-GX31 hard
drive mounting bracket. Consult the documentation that came with your SATA drive
for details on jumper locations and settings.
1. Install the metal bracket onto the hard disk drive using the flathead Phillips
screws provided.
2. Insert the hard disk drive into the base unit as shown.
Figure 13 Installing the Hard Disk Drive into Mounting Frame
3. Connect the Serial ATA cable connector to the hard disk drive.
4. Connect the 4-wire power cable to the hard disk drive and JPWR1 on the
motherboard.
16 H a r d w a r e I n s t a l l a t i o n a n d R e p l a c e m e n t