Table of Contents
Advertisement
3.4.3
Installing a Mini-PCI Card
1.
Remove the Keytop as instructed in section 3.1.2.
2.
Insert the Mini-PCI card at a 45 degree angle and press down until the side
clips click into place (use 32-bit 124-pin card edge Type IIIB).
3.
Replace the Keytop. As instructed in section 3.1.2.
4.
Replace the small plastic cover on the outside of the Keytop to the left of the
PCI slot blanking plate with the Phillips screw provided.
5.
Install the drivers from the CD provided with the card.
H a r d w a r e I n s t a l l a t i o n a n d R e p l a c e m e n t
Figure 16 Inserting a Mini-PCI slot card
ZPC-GX31 User Guide
19
Advertisement
Table of Contents
