Figure 14 Installing Theh; Nit - Cybernet ZPC-GX31 User Manual

Figure 14 Installing the Hard Disk Drive into the Base Unit
5. Moving aside the Parallel Printer cable, slide the hard disk drive into position
to install the mounting screws both on the base of the unit and on the right
side of the case.
6. Attach the LPT1 Parallel Printer cable connector to motherboard header
JLPT1.
H a r d w a r e I n s t a l l a t i o n a n d R e p l a c e m e n t
ZPC-GX31 User Guide
17