Control Key Definitions; Main Menu Help; Menu - Cybernet ZPC-GX31 User Manual

4.2 Control Key Definitions

Listed below are explanations of the keys displayed at the right side of the CMOS
Setup Utility screen:
Up arrow
Down arrow
Left arrow
Right arrow
Enter, Tab or
Shift-Tab
ESC key
+
-
F1 key
F2 key
F3 key
F4 key
F5 key
F6 key
F7 key
F8 key
F9 key
F10 key

4.3 Main Menu Help

The on-line description of the highlighted setup function is displayed at the bottom of
the screen. Press <F1> to pop up a small help window that describes the appropriate
keys to use and the possible selections for the highlighted item. To exit the Help
Window, press <ESC>.
C M O S S e t u p U t i l i t y
Move to previous item
Move to next item
Select Previous Screen
Select Next Screen
To Select a Field
Main Menu - Quit and don't save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu
- Exit current page and return to Main Menu
Increase the numeric value or make changes
Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and
Option Page Setup Menu
Changes colors of the screen
Changes colors of the screen
Reserved
Restore the previous CMOS value from CMOS, only for
Option Page Setup Menu
Load the Failsafe Defaults, only for Option Page Setup

Menu

Discard Changes [ok] [cancel]
Load Failsafe Defaults [ok] [cancel]
Load Optimal Defaults [ok] [cancel]
Save all the CMOS changes, only for Main Menu
ZPC-GX31 User Guide
25