System Assembly; Necessary Tools - Cybernet iONE-GX31 Series User Manual

System Assembly

This chapter provides system assembly information and procedures. While performing
any installation, use a grounded wrist strap before handling computer components and
carefully follow all installation procedures. Static electricity may damage the
components.
This chapter will include instructions for how to install CPU, heat sink, memory
modules, hard disk drive (HDD), optical disk drive (ODD), mini-PCI card, mini-PCIE
card and IrDA module.

Necessary Tools

A Phillips screwdriver can be used to do most of the installation. One
with a magnetic head is recommended.
Pliers can be used as an auxiliary tool to connect some connectors or
cables.
Forceps/tweezers can be used to pick up tiny screws or set up the
jumpers.
Rubber gloves can prevent injury from static charge.
Electric screwdriver can be used to secure all screws more quickly.
Cybernet iONE-GX31
Page 15
System Assembly