Table of Contents
Advertisement
ZPC-GX31 User Guide
4.1 Entering Setup
When the system is powered on, the BIOS will enter the Power-On Self Test (POST)
routines. These routines perform various diagnostic checks. If an error is
encountered, the error will be reported in one of two different ways:
•
If the error occurs before the display device is initialized, a series of beeps will be
transmitted.
•
If the error occurs after the display device is initialized, the screen will display the
error message.
After the POST routines are completed, the following message appears:
"Press DEL (or Delete) to enter SETUP"
To access the AMI BIOS SETUP program, you don't have to wait for the POST
process. Hold down the <DEL> key immediately to display the "CMOS SETUP
UTILITY" screen, which provides access to the utility's various functions.
Figure 20 CMOS Setup Utility – Main Menu Screen
24
C M O S S e t u p U t i l i t y
Advertisement
Table of Contents
